In JIT compiled apps, component definitions are compiled upon first
access. For a component class `A` that extends component class `B`, the
`B` component is also compiled when the `InheritDefinitionFeature` runs
during the compilation of `A` before it has finalized. A problem arises
when the compilation of `B` would flush the NgModule scoping queue,
where the NgModule declaring `A` is still pending. The scope information
would be applied to the definition of `A`, but its compilation is still
in progress so requesting the component definition would compile `A`
again from scratch. This "inner compilation" is correctly assigned the
NgModule scope, but once the "outer compilation" of `A` finishes it
would overwrite the inner compilation's definition, losing the NgModule
scope information.
In summary, flushing the NgModule scope queue could trigger a reentrant
compilation, where JIT compilation is non-reentrant. To avoid the
reentrant compilation, a compilation depth counter is introduced to
avoid flushing the NgModule scope during nested compilations.
Fixes#37105
PR Close#37795
Queries weren't matching directives that provide themselves via string
injection tokens, because the assumption was that any string passed to
a query decorator refers to a template reference.
These changes make it so we match both template references and
providers while giving precedence to the template references.
Fixes#38313.
Fixes#38315.
PR Close#38321
This commit contains no changes to code. It only breaks `i18n.ts` file
into `i18n.ts` + `i18n_apply.ts` + `i18n_parse.ts` +
`i18n_postprocess.ts` for easier maintenance.
PR Close#38368
The currently selected ICU was incorrectly being stored it `TNode`
rather than in `LView`.
Remove: `TIcuContainerNode.activeCaseIndex`
Add: `LView[TIcu.currentCaseIndex]`
PR Close#38345
This change provides better typing for the `LView.debug` property which
is intended to be used by humans while debugging the application with
`ngDevMode` turned on.
In addition this chang also adds jasmine matchers for better asserting
that `LView` is in the correct state.
PR Close#38359
I18n code breaks up internationalization into opCodes which are then stored
in arrays. To make it easier to debug the codebase this PR adds `debug`
property to the arrays which presents the data in human readable format.
PR Close#38154
This reverts commit b4449e35bf.
The example given from the previous change was for a component selector and not a provider selector.
This change fixes it.
Fixes#38323.
PR Close#38325
This reverts commit 7f8c2225f2.
This commit caused test failures internally, which were traced back to the
optimizer removing NgModuleFactory constructor calls when those calls caused
side-effectful registration of NgModules by their ids.
PR Close#38303
This allows Closure compiler to tree shake unused constructor calls to `NgModuleFactory`, which is otherwise considered
side-effectful. The Angular compiler generates factory objects which are exported but typically not used, as they are
only needed for compatibility with View Engine. This results in top-level constructor calls, such as:
```typescript
export const FooNgFactory = new NgModuleFactory(Foo);
```
`NgModuleFactory` has a side-effecting constructor, so this statement cannot be tree shaken, even if `FooNgFactory` is
never imported. The `NgModuleFactory` continues to reference its associated `NgModule` and prevents the module and all
its unused dependencies from being tree shaken. This effectively prevents all components from being tree shaken, making
Closure builds significantly larger than they should be.
The fix here is to wrap `NgModuleFactory` constructor with `noSideEffects(() => /* ... */)`, which tricks the Closure
compiler into assuming that the invoked function has no side effects. This allows it to tree-shake unused
`NgModuleFactory()` constructors when they aren't imported. Since the factory can be removed, the module can also be
removed (if nothing else references it), thus tree shaking unused components as expected.
PR Close#38147
`Attribute` decorator has defined `attributeName` as optional but actually its
mandatory and compiler throws an error if `attributeName` is undefined. Made
`attributeName` mandatory in the `Attribute` decorator to reflect this functionality
Fixes#32658
PR Close#38131
Now we have two implementations of Zone in Angular, one is NgZone, the other is NoopZone.
They should have the same signatures, includes
1. properties
2. methods
In this PR, unify the signatures of the two implementations, and remove the unnecessary cast.
PR Close#37581
Previously the instructions were included in the golden files to monitor the frequency and rate of
the instruction API changes for the purpose of understanding the stability of this API (as it was
considered for becoming a public API and deployed to npm via generated code).
This experiment has confirmed that the instruction API is not stable enough to be used as public
API. We've since also came up with an alternative plan to compile libraries with the Ivy compiler
for npm deployment and this plan does not rely on making Ivy instructions public.
For these reasons, I'm removing the instructions from the golden files as it's no longer important
to track them.
The are three instructions that are still being included: `ɵɵdefineInjectable`, `ɵɵinject`, and
`ɵɵInjectableDef`.
These instructions are already generated by the VE compiler to support tree-shakable providers, and
code depending on these instructions is already deployed to npm. For this reason we need to treat
them as public api.
This change also reduces the code review overhead, because changes to public api golden files now
require multiple approvals.
PR Close#38224
This commit fixes the spelling of the singular form
of the word function to the plural spelling in
packages/core/src/application_init.ts
PR Close#36586
This commit updates synthetic host property and listener instruction names to better align with other instructions.
The `ɵɵupdateSyntheticHostBinding` instruction was renamed to `ɵɵsyntheticHostProperty` (to match the `ɵɵhostProperty`
instruction name) and `ɵɵcomponentHostSyntheticListener` was renamed to `ɵɵsyntheticHostListener` since this
instruction is generated for both Components and Directives (so 'component' is removed from the name).
This PR is a followup after PR #35568.
PR Close#37145
This is part of a re-factor of template syntax and
structure. The first phase breaks out template syntax
into multiple documents. The second phase will be
a rewrite of each doc.
Specifically, this PR does the following:
- Breaks sections of the current template syntax document each into their own page.
- Corrects the links to and from these new pages.
- Adds template syntax subsection to the left side NAV which contains all the new pages.
- Adds the new files to pullapprove.
PR Close#36954
We currently use 16 bits to store information about nodes in a view.
The 16 bits give us 65536 entries in the array, but the problem is that while
the number is large, it can be reached by ~4300 directive instances with host
bindings which could realistically happen is a very large view, as seen in #37876.
Once we hit the limit, we end up overflowing which eventually leads to a runtime error.
These changes bump to using 20 bits which gives us around 1048576 entries in
the array or 16 times more than the current amount which could still technically
be reached, but is much less likely and the user may start hitting browser limitations
by that point.
I picked the 20 bit number since it gives us enough buffer over the 16 bit one,
while not being as massive as a 24 bit or 32 bit.
I've also added a dev mode assertion so it's easier to track down if it happens
again in the future.
Fixes#37876.
PR Close#38014
Currently we read lifecycle hooks eagerly during `ɵɵdefineComponent`.
The result is that it is not possible to do any sort of meta-programing
such as mixins or adding lifecycle hooks using custom decorators since
any such code executes after `ɵɵdefineComponent` has extracted the
lifecycle hooks from the prototype. Additionally the behavior is
inconsistent between AOT and JIT mode. In JIT mode overriding lifecycle
hooks is possible because the whole `ɵɵdefineComponent` is placed in
getter which is executed lazily. This is because JIT mode must compile a
template which can be specified as `templateURL` and those we are
waiting for its resolution.
- `+` `ɵɵdefineComponent` becomes smaller as it no longer needs to copy
lifecycle hooks from prototype to `ComponentDef`
- `-` `ɵɵNgOnChangesFeature` feature is now always included with the
codebase as it is no longer tree shakable.
Previously we have read lifecycle hooks from prototype in the
`ɵɵdefineComponent` so that lifecycle hook access would be monomorphic.
This decision was made before we had `T*` data structures. By not
reading the lifecycle hooks we are moving the megamorhic read form
`ɵɵdefineComponent` to instructions. However, the reads happen on
`firstTemplatePass` only and are subsequently cached in the `T*` data
structures. The result is that the overall performance should be same
(or slightly better as the intermediate `ComponentDef` has been
removed.)
- [ ] Remove `ɵɵNgOnChangesFeature` from compiler. (It will no longer
be a feature.)
- [ ] Discuss the future of `Features` as they hinder meta-programing.
Fix#30497
PR Close#35464
Fixes the following issues related to how we validate properties during JIT:
- The invalid property warning was printing `null` as the node name
for `ng-content`. The problem is that when generating a template from
`ng-content` we weren't capturing the node name.
- We weren't running property validation on `ng-container` at all.
This used to be supported on ViewEngine and seems like an oversight.
In the process of making these changes, I found and cleaned up a
few places where we were passing in `LView` unnecessarily.
PR Close#37773
Before this refactoring we had the WrappedValue class in
2 separate places:
- packages/core/src/change_detection/change_detection_util.ts
- packages/core/src/util/WrappedValue.ts
This commit removes the duplicate, leaving the class that has
the deprecation notice.
PR Close#37940
change in the definition of providedIn:any any instance creates a singleton instance
for each lazy loaded module and one instance for eager loaded module
PR Close#35292
Invoking a callback registered through `ViewRef.onDestroy` throws an error, because we weren't registering it correctly in the internal data structure. These changes also remove the `storeCleanupFn` function, because it was mostly identical to `storeCleanupWithContext` and was only used in one place.
Fixes#36213.
PR Close#37543
Special DI tokens like `ChangeDetectorRef` and `ElementRef` can provide a factory via `NG_ELEMENT_ID`. The problem is that we were reading it off the token as `token[NG_ELEMENT_ID]` which will go up the prototype chain if it couldn't be found on the current token, resulting in the private `ViewRef` API being exposed, because it extends `ChangeDetectorRef`.
These changes fix the issue by guarding the property access with `hasOwnProperty`.
Fixes#36235.
PR Close#37574
Verify that HTML parsing is supported in addition to DOMParser existence.
This maybe wasn't as important before when DOMParser was used just as a
fallback on Firefox, but now that DOMParser is the default choice, we need
to be more accurate.
PR Close#36578
JoostK
crisbeto
Misko Hevery
Doug Parker
Zara Cooper
Alex Rickabaugh
Ajit Singh
Ahn
JiaLiPassion
Igor Minar
Boaz Rymland
Andrew Kushnir
Kapunahele Wong
Sonu Kapoor
Samuel
pkozlowski-opensource
Judy Bogart
Santosh Yadav
Harri Lehtola