The ngtsc testing packages for file_system and logging were missing from the bazel deps rules, which means that they were not included in the releases
PR Close#37977
Currently when the `plural` or `select` keywords in an ICU contain trailing spaces (e.g. `{count, select , ...}`), these spaces are also included into the key names in ICU vars (e.g. "VAR_SELECT "). These trailing spaces are not desirable, since they will later be converted into `_` symbols while normalizing placeholder names, thus causing mismatches at runtime (i.e. placeholder will not be replaced with the correct value). This commit updates the code to trim these spaces while generating an object with placeholders, to make sure the runtime logic can replace these placeholders with the right values.
PR Close#37866
Incremental compilation allows for the output state of one compilation to be
reused as input to the next compilation. This involves retaining references
to instances from prior compilations, which must be done carefully to avoid
memory leaks.
This commit fixes such a leak with a complicated retention chain:
* `TrackedIncrementalBuildStrategy` unnecessarily hangs on to the previous
`IncrementalDriver` (state of the previous compilation) once the current
compilation completes.
In general this is unnecessary, but should be safe as long as the chain
only goes back one level - if the `IncrementalDriver` doesn't retain any
previous `TrackedIncrementalBuildStrategy` instances. However, this does
happen:
* `NgCompiler` indirectly causes retention of previous `NgCompiler`
instances (and thus previous `TrackedIncrementalBuildStrategy` instances)
through accidental capture of the `this` context in a closure created in
its constructor. This closure is wrapped in a `ts.ModuleResolutionCache`
used to create a `ModuleResolver` class, which is passed to the program's
`TraitCompiler` on construction.
* The `IncrementalDriver` retains a reference to the `TraitCompiler` of the
previous compilation, completing the reference chain.
The final retention chain thus looks like:
* `TrackedIncrementalBuildStrategy` of current program
* `.previous`: `IncrementalDriver` of previous program
* `.lastGood.traitCompiler`: `TraitCompiler`
* `.handlers[..].moduleResolver.moduleResolutionCache`: cache
* (via `getCanonicalFileName` closure): `NgCompiler`
* `.incrementalStrategy`: `TrackedIncrementalBuildStrategy` of previous
program.
The closure link is the "real" leak here. `NgCompiler` is creating a closure
for `getCanonicalFileName`, delegating to its
`this.adapter.getCanonicalFileName`, for the purposes of creating a
`ts.ModuleResolutionCache`. The fact that the closure references
`NgCompiler` thus eventually causes previous `NgCompiler` iterations to be
retained. This is also potentially problematic due to the shared nature of
`ts.ModuleResolutionCache`, which is potentially retained across multiple
compilations intentionally.
This commit fixes the first two links in the retention chain: the build
strategy is patched to not retain a `previous` pointer, and the `NgCompiler`
is patched to not create a closure in the first place, but instead pass a
bound function. This ensures that the `NgCompiler` does not retain previous
instances of itself in the first place, even if the build strategy does
end up retaining the previous incremental state unnecessarily.
The third link (`IncrementalDriver` unnecessarily retaining the whole
`TraitCompiler`) is not addressed in this commit as it's a more
architectural problem that will require some refactoring. However, the leak
potential of this retention is eliminated thanks to fixing the first two
issues.
PR Close#37835
When ngcc creates an entry-point program, the `allowJs` option is enabled
in order to operate on the JavaScript source files of the entry-point.
A side-effect of this approach is that external modules that don't ship
declaration files will also have their JavaScript source files loaded
into the program, as the `allowJs` flag allows for them to be imported.
This may pose an issue in certain edge cases, where ngcc would inadvertently
operate on these external modules. This can introduce all sorts of undesirable
behavior and incompatibilities, e.g. the reflection host that is selected for
the entry-point's format could be incompatible with that of the external
module's JavaScript bundles.
To avoid these kinds of issues, module resolution that would resolve to
a JavaScript file located outside of the package will instead be rejected,
as if the file would not exist. This would have been the behavior when
`allowJs` is set to false, which is the case in typical Angular compilations.
Fixes#37508
PR Close#37596
Changes `isWithinPackage` to take an `AbsoluteFsPath` instead of `ts.SourceFile`,
to allow for an upcoming change to use it when no `ts.SourceFile` is available,
but just a path.
PR Close#37596
Previously an error thrown in the `analyzeFn` would cause
the ngcc process to exit immediately without removing the
lockfile, and potentially before the unlocker process had been
successfully spawned resulting in the lockfile being orphaned
and left behind.
Now we catch these errors and remove the lockfile as needed.
PR Close#37739
This commit disables all diagnostic tests for DynamicValue diagnostics which
make assertions about the diagnostic filename while running tests on Windows.
Such assertions are currently suffering from a case sensitivity issue.
PR Close#37763
Several partial_evaluator tests in the diagnostics_spec check assert
correctness of diagnostic filenames. Previously these assertions compared
a resolved (`absoluteFrom`) filename with the TypeScript `ts.SourceFile`'s
`fileName` string, which caused the tests to fail on Windows because the
drive letter case differed.
This commit changes the assertions to use `absoluteFromSourceFile` instead
of the `fileName` string, resulting in an apples-to-apples comparison of
canonicalized paths.
PR Close#37758
This commit introduces a dedicated `DynamicValue` kind to indicate that a value
cannot be evaluated statically as the function body is not just a single return
statement. This allows more accurate reporting of why a function call failed
to be evaluated, i.e. we now include a reference to the function declaration
and have a tailor-made diagnostic message.
PR Close#37587
During AOT compilation, the value of some expressions need to be known at
compile time. The compiler has the ability to statically evaluate expressions
the best it can, but there can be occurrences when an expression cannot be
evaluated statically. For instance, the evaluation could depend on a dynamic
value or syntax is used that the compiler does not understand. Alternatively,
it is possible that an expression could be statically evaluated but the
resulting value would be of an incorrect type.
In these situations, it would be helpful if the compiler could explain why it
is unable to evaluate an expression. To this extend, the static interpreter
in Ivy keeps track of a trail of `DynamicValue`s which follow the path of nodes
that were considered all the way to the node that causes an expression to be
considered dynamic. Up until this commit, this rich trail of information was
not surfaced to a developer so the compiler was of little help to explain
why static evaluation failed, resulting in situations that are hard to debug
and resolve.
This commit adds much more insight to the diagnostic that is produced for static
evaluation errors. For dynamic values, the trail of `DynamicValue` instances
is presented to the user in a meaningful way. If a value is available but not
of the correct type, the type of the resolved value is shown.
Resolves FW-2155
PR Close#37587
Previously, an anonymous type was used for creating a diagnostic with related
information. The anonymous type would then be translated into the necessary
`ts.DiagnosticRelatedInformation` shape within `makeDiagnostic`. This commit
switches the `makeDiagnostic` signature over to taking `ts.DiagnosticRelatedInformation`
directly and introduces `makeRelatedInformation` to easily create such objects.
This is done to aid in making upcoming work more readable.
PR Close#37587
Commit 4213e8d5 introduced shim reference tagging into the compiler, and
changed how the `TypeCheckProgramHost` worked under the hood during the
creation of a template type-checking program. This work enabled a more
incremental flow for template type-checking, but unintentionally introduced
several regressions in performance, caused by poor incrementality during
`ts.Program` creation.
1. The `TypeCheckProgramHost` was made to rely on the `ts.CompilerHost` to
retrieve instances of `ts.SourceFile`s from the original program. If the
host does not return the original instance of such files, but instead
creates new instances, this has two negative effects: it incurs
additional parsing time, and it interferes with TypeScript's ability to
reuse information about such files.
2. During the incremental creation of a `ts.Program`, TypeScript compares
the `referencedFiles` of `ts.SourceFile` instances from the old program
with those in the new program. If these arrays differ, TypeScript cannot
fully reuse the old program. The implementation of reference tagging
introduced in 4213e8d5 restores the original `referencedFiles` array
after a `ts.Program` is created, which means that future incremental
operations involving that program will always fail this comparison,
effectively limiting the incrementality TypeScript can achieve.
Problem 1 exacerbates problem 2: if a new `ts.SourceFile` is created by the
host after shim generation has been disabled, it will have an untagged
`referencedFiles` array even if the original file's `referencedFiles` was
not restored, triggering problem 2 when creating the template type-checking
program.
To fix these issues, `referencedFiles` arrays are now restored on the old
`ts.Program` prior to the creation of a new incremental program. This allows
TypeScript to get the most out of reusing the old program's data.
Additionally, the `TypeCheckProgramHost` now uses the original `ts.Program`
to retrieve original instances of `ts.SourceFile`s where possible,
preventing issues when a host would otherwise return fresh instances.
Together, these fixes ensure that program reuse is as incremental as
possible, and tests have been added to verify this for certain scenarios.
An optimization was further added to prevent the creation of a type-checking
`ts.Program` in the first place if no type-checking is necessary.
PR Close#37641
Previously the `ProgramBasedEntryPointFinder` was parsing all the
entry-points referenced by the program for dependencies even if all the
entry-points had been processed already.
Now this entry-point finder will re-use the `EntryPointManifest` to load
the entry-point dependencies when possible which avoids having to parse
them all again, on every invocation of ngcc.
Previously the `EntryPointManifest` was only used in the
`DirectoryWalkerEntryPointFinder`, which also contained the logic for
computing the contents of the manifest. This logic has been factored out
into an `EntryPointCollector` class. Both the `ProgramBasedEntryPointFinder`
and `DirectoryWalkerEntryPointFinder` now use the `EntryPointManifest` and
the `EntryPointCollector`.
The result of this change is that there is a small cost on the first run of
ngcc to compute and store the manifest - the processing takes 102% of the
processing time before this PR. But on subsequent runs there is a
significant benefit on subsequent runs - the processing takes around 50%
of the processing time before this PR.
PR Close#37665
Source-maps can be linked to from a source-file by a comment at
the end of the file.
Previously the `SourceFileLoader` would read
the first comment that matched `//# sourceMappingURL=` but
this is not valid since some bundlers may include embedded
source-files that contain such a comment.
Now we only look for this comment in the last non-empty line
in the file.
PR Close#32912
Previously localized strings were not mapped to their original
source location, so it was not possible to back-trace them
in tools like the i18n message extractor.
PR Close#32912
Webpack and other build tools sometimes inline the contents of the
source files in their generated source-maps, and at the same time
change the paths to be prefixed with a protocol, such as `webpack://`.
This can confuse tools that need to read these paths, so now it is
possible to provide a mapping to where these files originated.
PR Close#32912
This method will allow us to find the original location given a
generated location, which is useful in fine grained work with
source-mapping. E.g. in `$localize` tooling.
PR Close#32912
The file-writing error in the this commit can also be the result
of the ngcc process dying in the middle of writing files.
This commit improves the error message to offer a resolution
in case this is the reason for the error.
Fixes#36393
PR Close#37672
The `SourceFile` and associated code is general and reusable in
other projects (such as `@angular/localize`). Moving it to `ngtsc`
makes it more easily shared.
PR Close#37114
The `Logger` interface and its related classes are general purpose
and could be used by other tooling. Moving it into ngtsc is a more
suitable place from which to share it - similar to the FileSystem stuff.
PR Close#37114
This dependency host tokenizes files to identify all the imported
paths. This commit calculates the last place in the source code
where there can be an import path; it then exits the tokenization
when we get to this point in the file.
Testing with a reasonably large project showed that the tokenizer
spends about 2/3 as much time scanning files. For example in a
"noop" hot run of ngcc using the program-based entry-point
finder the percentage of time spent in the `scan()` function of
the TS tokenizer goes down from 9.9% to 6.6%.
PR Close#37639
We recently added a transformer to NGC that is responsible for downleveling Angular
decorators and constructor parameter types. The primary goal was to mitigate a
TypeScript limitation/issue that surfaces in Angular projects due to the heavy
reliance on type metadata being captured for DI. Additionally this is a pre-requisite
of making `tsickle` optional in the Angular bazel toolchain.
See: 401ef71ae5 for more context on this.
Another (less important) goal was to make sure that the CLI can re-use
this transformer for its JIT mode compilation. The CLI (as outlined in
the commit mentioned above), already has a transformer for downleveling
constructor parameters. We want to avoid this duplication and exported
the transform through the tooling-private compiler entry-point.
Early experiments in using this transformer over the current one, highlighted
that in JIT, class decorators cannot be downleveled. Angular relies on those
to be invoked immediately for JIT (so that factories etc. are generated upon loading)
The transformer we exposed, always downlevels such class decorators
though, so that would break CLI's JIT mode. We can address the CLI's
needs by adding another flag to skip class decorators. This will allow
us to continue with the goal of de-duplication.
PR Close#37545
Commit 24b2f1da2b introduced an `NgCompiler` which operates on a
`ts.Program` independently of the `NgtscProgram`. The NgCompiler got its
`IncrementalDriver` (for incremental reuse of Angular compilation results)
by looking at a monkey-patched property on the `ts.Program`.
This monkey-patching operation causes problems with the Angular indexer
(specifically, it seems to cause the indexer to retain too much of prior
programs, resulting in OOM issues). To work around this, `IncrementalDriver`
reuse is now handled by a dedicated `IncrementalBuildStrategy`. One
implementation of this interface is used by the `NgtscProgram` to perform
the old-style reuse, relying on the previous instance of `NgtscProgram`
instead of monkey-patching. Only for `NgTscPlugin` is the monkey-patching
strategy used, as the plugin sits behind an interface which only provides
access to the `ts.Program`, not a prior instance of the plugin.
PR Close#37339
Currently the partial evaluator isn't able to resolve a variable declaration that uses destructuring in the form of `const {value} = {value: 0}; const foo = value;`. These changes add some logic to allow for us to resolve the variable's value.
Fixes#36917.
PR Close#37497
Previously, ngcc would only be able to match an ngcc configuration to
packages that were located inside the project's top-level
`node_modules/`. However, if there are multiple versions of a package in
a project (e.g. as a transitive dependency of other packages), multiple
copies of a package (at different versions) may exist in nested
`node_modules/` directories. For example, one at
`<project-root>/node_modules/some-package/` and one at
`<project-root>/node_modules/other-package/node_modules/some-package/`.
In such cases, ngcc was only able to detect the config for the first
copy but not for the second.
This commit fixes this by returning a new instance of
`ProcessedNgccPackageConfig` for each different package path (even if
they refer to the same package name). In these
`ProcessedNgccPackageConfig`, the `entryPoints` paths have been
processed to take the package path into account.
PR Close#37040
This commit adds a `packageName` property to the `EntryPoint` interface.
In a subsequent commit this will be used to retrieve the correct ngcc
configuration for each package, regardless of its path.
PR Close#37040
In order to retrieve the ngcc configuration (if any) for an entry-point,
ngcc has to detect the containing package's version.
Previously, ngcc would try to read the version from the entry-point's
`package.json` file, which was different than the package's top-level
`package.json` for secondary entry-points. For example, it would try to
read it from `node_modules/@angular/common/http/package.json` for
entry-point `@angular/common/http`. However, the `package.json` files
for secondary entry-points are not guaranteed to include a `version`
property.
This commit fixes this by first trying to read the version from the
_package's_ `package.json` (falling back to the entry-point's
`package.json`). For example, it will first try to read it from
`@angular/common/package.json` for entry-point `@angular/common/http`.
PR Close#37040
This commit refactors the way info is retrieved from entry-point
`package.json` files to make it easier to extract more info (such as the
package's name) in the future. It also avoids reading and parsing the
`package.json` file multiple times (as was happening before).
PR Close#37040
Olivier Combe
Andrew Kushnir
Alex Rickabaugh
JoostK
Pete Bacon Darwin
Keen Yee Liau
Paul Gschwendtner
crisbeto
George Kalpakas