This commit updates the `recognize` algorithm to work with named outlets
which have empty path parents. For example, given the following config
```
const routes = [
{
path: '',
children: [
{path: 'a', outlet: 'aux', component: AuxComponent}
]}
];
```
The url `/(aux:a)` should match this config. In order to do so, we need
to allow the children of `UrlSegmentGroup`s to match a `Route` config
for a different outlet (in this example, the `primary`) when it's an
empty path. This should also *only* happen if we were unable to find a
match for the outlet in the level above. That is, the matching strategy
is to find the first `Route` in the list which _matches the given
outlet_. If we are unable to do that, then we allow empty paths from
other outlets to match and try to find some child there whose outlet
matches our segment.
PR Close#40029
To make the tests suite easier to follow, `Recognize#apply` can be made
into a synchronous function rather than one that return an `Observable`.
Also, as a chore, remove as many `any` types as possible.
PR Close#40029
This commit updates the `recognize` algorithm to return `null` when a
segment does not match a given config rather than throwing an error.
This makes the code much easier to follow because the "no match" result
has to be explicitly handled rather than catching the error in very
specific places.
PR Close#40029
When stepping through the `recognize` algorithm, it is much easier to
follow when using a simple `for...of` rather than the helper
`mapChildrenIntoArray` with the passed closure. The only special thing that
`mapChildrenIntoArray` does is ensure the primary route appears first.
This change will have no affect on the result because `processChildren` later calls
`sortActivatedRouteSnapshots`, which does the same thing.
PR Close#40029
Prior to this commit, removing `FormControlDirective` and `FormGroupName` directive instances didn't clear
the callbacks previously registered on FromControl/FormGroup class instances. As a result, these callbacks
were executed even after `FormControlDirective` and `FormGroupName` directive instances were destroyed. That was
also causing memory leaks since these callbacks also retained references to DOM elements.
This commit updates the cleanup logic to take care of properly detaching FormControl/FormGroup/FormArray instances
from the view by removing view-specific callback at destroy time.
Closes#20007, #37431, #39590.
PR Close#39235
DI providers can be defined via `useFactory` function, which may have arguments configured via `deps` array.
The `deps` array may contain DI flags represented by DI decorators (such as `@Self`, `@SkipSelf`, etc). Prior to this
commit, having the `@Host` decorator in `deps` array resulted in runtime error in Ivy. The problem was that the `@Host`
decorator was not taken into account while `useFactory` argument list was constructed, the `@Host` decorator was
treated as a token that should be looked up.
This commit updates the logic which prepares `useFactory` arguments to recognize the `@Host` decorator.
PR Close#40122
The CLI integration can provide code files in a non-deterministic
order, which led to the extracted translation files having
messages in a non-consistent order between extractions.
This commit fixes this by ensuring that serialized messages
are ordered by their location.
Fixes#39262
PR Close#40192
`Route` configs with `redirectTo` as well as `canActivate` are not valid
because the `canActivate` guards will never execute. Redirects are
applied before activation. There is no error currently for these
configs, but another commit will change this so that an error does
appear in dev mode. This migration fixes the configs by removing the
`canActivate` property.
PR Close#40067
Redirects in the router are processed before activations. This means that a canActivate will
never execute if a route has a redirect. Rather than silently ignoring
the invalid config, developers should be notified so they know why it
doesn't work.
Closes#18605
The feature request for a function/class redirect is covered in #13373.
PR Close#40067
Given the template
`<div (click)="doSomething($event)"></div>`
If you request references for the `$event`, the results include both `$event` and `(click)="doSomething($event)"`.
This happens because in the TCB, `$event` is passed to the `subscribe`/`addEventListener`
function as an argument. So when we ask typescript to give us the references, we
get the result from the usage in the subscribe body as well as the one passed in as an argument.
This commit adds an identifier to the `$event` parameter in the TCB so
that the result returned from `getReferencesAtPosition` can be
identified and filtered out.
fixes#40157
PR Close#40158
According to the [spec](https://html.spec.whatwg.org/#scroll-to-fragid),
we should attempt to set the browser focus after scrolling to a
fragment. Note that this change does not exactly follow the robust steps
outlined in the spec by finding a fallback target if the original is not
focusable. Instead, we simply attempt to focus the element by calling
`focus` on it, which will do nothing if the element is not focusable.
fixes#30067
PR Close#40241
The `ɵɵngDeclareDirective` calls are designed to be translated to fully
AOT compiled code during a build transform, but in cases this is not
done it is still possible to compile the declaration object in the
browser using the JIT compiler. This commit adds a runtime
implementation of `ɵɵngDeclareDirective` which invokes the JIT compiler
using the declaration object, such that a compiled directive definition
is made available to the Ivy runtime.
PR Close#40101
The linker is implemented using a Babel transform such that Babel needs
to parse and walk a source file to find the declarations that need to be
compiled. If it can be determined that a source file is known not to
contain any declarations the parsing and walking can be skipped as a
performance improvement. This commit adds an exposed function for tools
that integrate the linker to use to allow short-circuiting of the linker
transform.
PR Close#40137
Internally we store lifecycle hooks in the format `[index, hook, index, hook]` and when
iterating over them, we check one place ahead to figure out whether we've hit found
a hook or an index. The problem is that the loop is set up to iterate up to `hooks.length`
which means that we may go out of bounds on the last iteration, depending on where
we started. This appears to happen under a specific set of circumstances where a
directive calls `detectChanges` from an input setter while it has `ngOnChanges` and
`ngAfterViewInit` hooks.
These changes resolve the issue by only iterating up to `length - 1` which guarantees that
we can always look one place ahead.
This appears to have regressed some time in version 10.
Fixes#38611.
PR Close#40206
Previously `\r\n` was being treated as a single character in source-map
line start positions, which caused segment positions to become offset.
Now the `\r` is ignored when splitting, leaving it at the end of the
previous line, which solves the offsetting problem, and does not affect
source-mappings.
Fixes#40169Fixes#39654
PR Close#40187
This commit fixes an issue in the ivy native language service
that caused the logic that finds a target node given a template
position to throw away the results. This happened because the
source span of a variable node in the shorthand structural
directive syntax (i.e. `*ngIf=`) included the entire binding.
The result was that we would add the variable node to the path and then
later detect that the cursor was outside the key and value spans and
throw away the whole result. In general, we do this because we do not
want to show information when the cursor is between a key/value
(`inputA=¦"123"`). However, when using the shorthand syntax, we run into
the situation where we can match an `AttributeBinding` as well as the
vaariable in `*ngIf="som¦eValue as myLocalVar"`. This commit updates the
visitor to retain enough information in the visit path to throw away
invalid targets but keep valid ones if there were multiple results on a
`t.Element` or `t.Template`.
PR Close#40239
The linker entry-points were not previously exposed in the NPM Bazel
target so they were omitted from the bundle. This commit adds the
necessary entry-points to the compiler-cli's npm_package target.
PR Close#40180
The types of directives and pipes that are used in a component's
template may be emitted into the partial declaration wrapped inside a
closure, which is needed when the type is declared later in the module.
This poses a problem for JIT compilation of partial declarations, as
this closure is indistinguishable from a class reference itself. To mark
the forward reference function as such, this commit changes the partial
declaration codegen to emit a `forwardRef` invocation wrapped around
the closure, which ensures that the closure is properly tagged as a
forward reference. This allows the forward reference to be treated as
such during JIT compilation.
PR Close#40117
PR #39876 introduced an error where the `onDestroy` of `ComponentRef`
would only get called if `ngDevMode` was set to true. This was because
in dev mode we would freeze `TCleanup` to verify that no more
static cleanup would get added to `TCleanup` array. This ensured
that `TCleanup` was always present in dev mode. In production the
`TCleanup` would get created only when needed. The resulting cleanup
code was incorrectly indented and would only run if `TCleanup` was
present causing this issue.
Fix#40105
PR Close#40120
Escape the content of the strings so that it can be safely inserted into a comment node.
The issue is that HTML does not specify any way to escape comment end text inside the comment.
`<!-- The way you close a comment is with "-->". -->`. Above the `"-->"` is meant to be text
not an end to the comment. This can be created programmatically through DOM APIs.
```
div.innerHTML = div.innerHTML
```
One would expect that the above code would be safe to do, but it turns out that because comment
text is not escaped, the comment may contain text which will prematurely close the comment
opening up the application for XSS attack. (In SSR we programmatically create comment nodes which
may contain such text and expect them to be safe.)
This function escapes the comment text by looking for the closing char sequence `-->` and replace
it with `-_-_>` where the `_` is a zero width space `\u200B`. The result is that if a comment
contains `-->` text it will render normally but it will not cause the HTML parser to close the
comment.
PR Close#40136
Currently when `ɵɵtemplate` and `ɵɵelement` instructions are generated by compiler, all static attributes are
duplicated for both instructions. As a part of this duplication, i18n translation blocks for static i18n attributes
are generated twice as well, causing duplicate entries in extracted translation files (when Ivy extraction mechanisms
are used). This commit fixes this issue by introducing a cache for i18n translation blocks (for static attributes
only).
Also this commit further aligns `ɵɵtemplate` and `ɵɵelement` instruction attributes, which should help implement
more effective attributes deduplication logic.
Closes#39942.
PR Close#40077
Durring analysis we find template parse errors. This commit changes
where the type checking context stores the parse errors. Previously, we
stored them on the AnalysisOutput this commit changes the errors to be
stored on the TemplateData (which is a property on the shim). That way,
the template parse errors can be grouped by template.
Previously, if a template had a parse error, we poisoned the module and
would not procede to find typecheck errors. This change does not poison
modules whose template have typecheck errors, so that ngtsc can emit
typecheck errors for templates with parse errors.
Additionally, all template diagnostics are produced in the same place.
This allows requesting just the template template diagnostics or just
other types of errors.
PR Close#40026
Refactors the i18n error tests to be unit tests in ngtsc_spec.ts. There
is two reasons for doing this.
First is that the tests in compliace_old expected an expection to be be
thrown but did not fail the test if no exception was thrown. That means
that this test could miss catching a bug. It is also a big hacky to call
compile directly and expect an exception to be thrown for diagnostics.
Also, this can easily be unit tested and an end-to-end test is not
necessary since we are not making use of the goldfiles for these tests.
It is easier to maintain and less hacky to validate that we get helpful
error messages when nesting i18n sections by calling getDiagnostics
directly.
PR Close#40026
This commit temporarily excludes classes declared in .d.ts files from checks
regarding whether providers are actually injectable.
Such classes used to be ignored (on accident) because the
`TypeScriptReflectionHost.getConstructorParameters()` method did not return
constructor parameters from d.ts files, mostly as an oversight. This was
recently fixed, but caused more providers to be exposed to this check, which
created a breakage in g3.
This commit temporarily fixes the breakage by continuing to exclude such
providers from the check, until g3 can be patched.
PR Close#40118
This comit adds support for autocompletion of attributes that create
structural directives. Such completions differ from those of normal
attributes, as the structural directive syntax creates a synthetic
<ng-template> node which has different attributes from the main element.
PR Close#40032
Andrew Scott
Andrew Kushnir
Pete Bacon Darwin
Howard Jing
JoostK
Kristiyan Kostadinov
Misko Hevery
Alan Agius
Zach Arend
Alex Rickabaugh